STAGER

The Stager is a 6 x 2.3 kW digital and analog dimmer, equipped with faders.

The Stager combines the whole digital power, the DMX precision with the comfort of analog input.

Its internal programs make it an universal product.

• Easy set-up
• Portable or rackable 19’’ (3U) block
• Chasers and tests
• Instantaneous location and vizualisation of defects on the power supply network
• Controls: DMX 512 digital, 0/+10VDCanalog voltage, by 6 faders and 1 Master
• Protections by fuse
• Outputs on sockets

The Stager is designed for all applications, permanent or mobile, as theatre, museum, school, disco, touring ...

FEATURES

Patch : Serial, first channel selection on 3 address wheels
Curve : Linear
Controls : DMX 512 on XLR 5
Last level held in case of signal interruption
0/+10 VDC voltage on female DIN 8 connector
6 faders + 1 master on the front face
Possibe control in parallel with DMX, analog control and faders
Test : All channels, by steps
Chaser : 9 chasers with speed adjustment, selection by 3 encoding wheels
Indicators : LED power for power supply and signalisation of defect
LED DMX for the reception of digital signal (DMX 512)

OPTIONS

• EEC, Swiss, Schuko connectors
• Fixing brackets (19 ‘’)
• Single pole + neutral MCB
• RCCD 30 mA
• Star-delta power

TECHNICAL

Power rating : 6 x 2.3 kW under 230 VAC
Power supply : Tri + N + GND, 230/400 VAC, 50/60 Hz,
on cable 5 x 2.5 mm²
Protection : Fuse MCB 10 x 38, 10 A
Triac control : Digital in all control cases
Output sockets : NF double 10/16 A, EEC, Schuko,
Swiss
Operation mode : Rising edge dimming
EMC compatibility : According to the EN 55014/60669
standards
Environment : Temperature : 0°C to + 40°C
Humidity : 0 % to 90 %
Protection degree : Protection degree of enclosure = 30
Cooling : By natural convection
Weight : 8 kg
Dimensions : Width = 425 mm, Height = 133 mm, Depth = 300 mm